version 1.2_en
page 7
Concrete brick
For measuring concrete bricks, press the humimeter
GF2 with its full surface and a pressure of approx. 4
kg on an even area of the brick. Make sure that the
whole measuring area of the device rests on the brick!
Light concrete bricks: < 2100kg/m³
Heavy concrete bricks: > 2300kg/m³
Aerated concrete
For measuring aerated concrete, press the
humimeter GF2 with its full surface and a
pressure of approx. 4 kg on an even area of the
block.
Digit calibration curve
The digit calibration curve offers a dimensionless measuring range from 0 to
100, which corresponds to the total measuring range of the device. This
calibration curve is destined for measuring special material.
The digit calibration curve is also suitable for detecting water or damp areas
in the wall. The higher the shown value, the wetter the measured area.
very dry: 0% very wet: 100%
NOTE: Also electric cables or pipes can cause a high digit value.
