page 2
version 1.2_en
Evaluation scale of measuring value
For some calibration curves, the measuring value shown on the display is
evaluated in 4 different increments. This evaluation scale bases on the
experience of Schaller GmbH. As the increments can differ according to the
craft resp. business, a plausibility check is recommended.
At increasing moisture, the 4 increments are:
dry -> optimum -> moist -> wet
According to the measured material the evaluation scale differs!
Design of GF2 basic device (article no. 12853)
calibration
curve
temperature
measuring value
batteries slot
(flipside)
selection of
calibration
curves
POWER button
external sensors
evaluation
optional USB interface
