version 1.2_en
page 29
Design GF2 r.h. sensor with 1m cable and plastic sensor tube
Ø8mm (article no. 13159)
Information for measuring with GF2 r.h. sensor with 1m cable
and plastic sensor tube Ø8mm (article no. 13159)
With the aid of these measuring bushes, the relative air humidity in the floor
screed can be determined. The measuring bush has to be opened at the
desired measuring depth with the hammering aid. Drill a hole of 12 mm
diameter in the floor screed and insert the measuring bush using the
hammering aid. Then insert the sensor into the bush and let it adjust for
approx. half an hour. For measuring at a later date, the measuring bush
should be closed with the cap.
r.h. sensor
8mm diameter
relative
air humidity
temperature
