page 14
version 1.2_en
For the basic adjustments of the software please
look through the LogMemorizer instructions on
USB flash drive.
Print saved data
(
only
possible
with
optional
USB
interface)
To print your saved data, connect the device to the
printer using the printer cable that was delivered
with your device. Carefully loose the protection cap
on the humimeter. At first plug in this side of the
connector having the plastic casing closer to the
end at the humimeter. Then switch on the device.
Not till then the other side of the cable has to be
plugged in at the printer. Switch on the printer by
pressing
. Now the green LED is blinking. If it
does not blink, please change the batteries and try
again.
Press the
button at your humimeter until you
reach the menu (see image on the right). Choose
„Print Logs“ and confirm by pressing .
Now you can select a print of the last saved
measuring series or of all saved measuring series
(logs).
Confirm by pressing again. The selected logs are
printed out now.
NOTE: To save paper, please think of clearing the data storage regularly.
