• Plug and play Serial port (RS232) communications with Humboldt
Material Testing Software (HMTS) for controlling and downloading
stored data.
• Unique ID and RS485 communication port for multiple unit
connections with a single computer.
In addition, the loader offers a large, backlit LCD display, a touch-sensitive
keypad, a battery-backed real time clock, and auto-conversion of calibration
and speed parameters between English and SI units.
General Warnings
Safety Warnings
Operators should take care to operate this machine under the maximum
load restrictions. The machine is programmed at the factory to provide
safety shutdown if the upper or lower maximum travel is exceeded as well
as if the upper instrument calibration is exceeded.
Electrical Warnings
Typically, there is no reason for the operator to open the machine.
However, if the customer’s engineers attempt to change settings to the
circuit board connected to the back panel, the machine must always be
unplugged before this operation. Unplugging the internal connection to
the back panel circuit board while the machine is under power will result
in permanent damage to the circuit board.
Manufacturer’s Rights and Responsibilities
Software Copyright
COPYRIGHT NOTICE
©2006 HUMBOLDT MFG. CO.
All Rights Reserved.
This manual or parts thereof, may not be
reproduced in any form without the expressed written
permission of HUMBOLDT MFG. CO.
UNPUBLISHED LICENSED PROPRIETARY WORK
©2006 HUMBOLDT MFG. CO.
2
