13
Set Time
To set the Time press
until you see this screen:
Press
you will see this screen:
Press
you will see this screen:
Press
(DATE/UNIT/STANDARD). You should see this screen:
Press
(CHANGE TIME). You should see this screen:
Press
(TIME) to select the HOURS/MINUTES/SECONDS. Press
(INCREASE). or Press
(DECREASE) to change the appropriate number.
To return to any prior screen you can always press
* REVIEW LAST TEST
* RUN TEST
* MORE SETUP
* ENGINEERING SETUP
* SENSOR LIMITS
OFF
* RAW_DATA
* MORE SETUP
* RECALL CALIBRATION
* CHANGE DEVICE ID
* DATE/UNIT/STANDARD
* MANUFACTURES INFO
* TIME = "HH/MM/SS"
* INCREASE
* DECREASE
* CHANGE DATE
* CHANGE TIME
* UNIT = ENGLISH/METRIC
* STANDARD = ASTM/BS
