25
Press
(RUN TEST) You should see this screen:
Press
(CBR/LBR TEST) You should see this screen:
Press
(SPEED) to access the speed readout on line 2 of the screen
above. Keep pressing
until the digit you want to set is flashing. Once
you have selected the digit you wish to set, press
to increase the
number or press
to decrease the number. Once the speed has been
set, press
to initiate the test. You should see this screen:
The platen will rise until a 10 lb. seating load is applied. It will then stop and
the load and displacement will be zeroed. You should see this screen:
Add the remainder of the surcharge weights, then press
* REVIEW LAST TEST
* RUN TEST
* MORE SETUP
* MARSHALL TEST
* CBR/LBR TEST
* USER DEFINED TEST
MOTOR SPEED ADJUST
* SPEED= “0.00000”
* INCREASE
* DECREASE
CBR/LBR TEST # of readings
LOAD
“#”
DISP
“#”
* END TEST
PLEASE ADD THE
REMAINDER OF
SURCHARGE WEIGHT
THEN PRESS UP KEY
