English 15
5.1 Mikrofon anschließen – Schritt für Schritt
To connect a microphone, you have to use the IN1 input (see Fig. 3). The Combo jack allows you to plug in a
microphone with an XLR plug (symmetrical) or with a 6.3mm cinch plug (asymmetrical).
Abb.3 Connect a microphone to IN1 input
1. First disconnect the plug from the wall outlet.
2. Slide the DIP switch
1
and
2
to position „OFF“ (see 5.2 Overview, Microphone level)
3. If you use a microphone with phantom voltage, also slide the DIP switch
3
to position „ON“ (see
5.2 Overview, Microphone level with phantom voltage).
Important:
When the phantom voltage is switched on, do not connect a microphone with an
asymmetrical output or a LINE IN device, as this can result in damage to these devices.
4. Plug the power cord back into the wall outlet.
5.2 Overview – All possible settings for the IN1 jack
Line level:
DIP switch
1
and
2
at position „ON“ - Line level
Important:
DIP switch
3
at position „OFF“ - phantom voltage switched off
DIP switch
4
at position „ON“ - AGC switched on
DIP switch
1
and
2
at position „ON“ - Line-Pegel
Important:
DIP switch
3
at position „OFF“ - phantom voltage switched off
DIP switch
4
at position „ON“ - AGC switched off
Microphone level with
DIP switch
1
and
2
at position „OFF“ - Microphone level
phantom voltage:
DIP switch
3
at position „ON“ - phantom voltage switched on
DIP switch
4
at position „ON“ - AGC switched on
DIP switch
1
and
2
at position „OFF“ - Microphone level
DIP switch
3
at position „ON“ - phantom voltage switched on
DIP switch
4
at position „OFF“ - AGC switched off
Microphone level without
DIP switch 1 and 2 auf position „OFF“ - Microphone level
phantom voltage:
DIP switch 3 at position „OFF“ - phantom voltage switched off
DIP switch
4
at position „ON“ - AGC switched on
DIP switch
1
and
2
at position „OFF“ - Microphone level
DIP switch
3
at position „ON“ - phantom voltage switched off
DIP switch
4
at position „ON“ - AGC switched off
5.3 Switching on and off the AGC function (Automatic Gain Control)
To switch on the AGC function, slide the DIP switch
4
up to position „ON“. The AGC function will be switch off, if
you slide the DIP switch
4
back down.
IN 1
PUSH
IN 2
IN 3
DIP
1
2 3 4
DIP
ON
1 2 3 4
DIP
ON
1 2 3 4
DIP
ON
1 2 3 4
DIP
ON
1 2 3 4
DIP
ON
1 2 3 4
DIP
ON
1 2 3 4
