1 2 3 4 5 6 7 8 9 10 11
12 13
1.1 Front panel
(1) Power supply indicator
(2) Input sensitivity indicator
(3) Regulator to set required input sensitivity
(4) Regulator to set slave loop current
(5) Volume control for headphone jack
(6) Slave headphone jack
(7) Level indicator for the loop current (slave)
(8) Regulator to adjust the master loop current
(9) Volume control for headphone jack
(10) Master headphone output jack
(11) Level indicator for loop current (master)
We would like to congratulate you on purchasing your new
PROLOOP LOS
induction loop amplifier. You have cho-
sen a product that skillfully combines appealing design with high technical performance.
This handbook describes exactly how the amplifier works and how it is to be used.
Please read through the
operating instructions carefully
before using the amplifier. We also reserve the right to make changes to incor-
porate new product developments at any time.
1. Übersicht der Anschlüsse und Bedienelemente
14
15 16 17 18
1.2 Rear panel
(12) Power supply (230V / 50Hz)
(13) Screw terminals for the connection of the
loop (master/slave)
(14) LINE OUT, monitor output (master/slave)
(15) 4 pole DIP switch
(16) IN3 RCA LINE IN input jack
(17) IN2 RCA LINE IN input jack
(18) IN1 LINE IN jack Combo XLR (symmetrical) /
6.3mm cinch (asymmetrical)
IN1
T
IN
Power
IN1
IN1
IN2
IN1
IN2
IN1
Slave
IN1
Master
SLAVE LOOP
230 V AC
RoHS
conform
IN 1
WARNING:
CASE MAY BECOME WARM!
MASTER LOOP
MASTER
OUT
SLAVE
OUT
PUSH
IN 2
DIP
1 2 3 4
IN 3
10 English
