8
C
D
B
A
1. If using dual monitors, first route the cables through the
plastic cable clips on the front of the crossbar. If using a single
monitor, skip to step 2.
2. Route power and monitor cables through the flexible cable
clips on the M8.1’s upper link (B).
NOTE:
Leave enough slack in the cables to allow arms to
rotate without difficulty.
3. Slide the plastic cover (C) on the lower link upward
to remove.
4. Using the two cutouts (D) as guides, run the
cables over the lower link cover.
5. Lift the cover and cables up to the lower link, making
sure that the cover sits flush with the surface of the arm.
6. Slide the cover down the arm to lock in place, then gently
pull the cables through the arm to remove excess slack.
CAUTION:
Don’t insert extension cords. Don’t insert any cord
connecting one workstation to another.
STEP 9: CABLE MANAGEMENT
①
④
②
⑤
③
⑥
Summary of Contents for M8.1
Page 19: ...19 ...
