5
ENGLISH
humantouch.com
4
1. Plug it in
Plug the power cord into a 120-volt power source.
2. Power on
Turn the master power switch (on the left-hand side of the Foot and calf massager) to On.
Your foot and calf massager
comes fully
assembled. Simply plug it in, turn it on, take
a seat and you’re set to go!
Rotate the foot and calf massager to a vertical
angle when your legs are upright, such as
when sitting at a desk chair. When sitting
in a more reclined position, such as in a
massage chair or on a sofa, rotate the foot and
calf massager to a more horizontal angle for
maximum comfort.
There is no right or wrong combination—full
adjustablity simply ensures the pleasures of a
luxurious foot or calf massage.
3. Position your foot and calf massager in front
of your favorite chair.
Non Skid Floor Protectors
–Floor protectors keep unit
in place while isolating any vibration or sound produced
by the foot and calf massager.
4. Take a seat.
5. Place your feet all the way into the
foot and calf
massage wells.
The bottom of your feet and the back of your calves should be touching the well walls.
6. Adjust the foot and calf massager angle:
1. While sitting in your chair with your feet in the Human Touch foot and calf massager
massage wells, pull out the Rotation Release lever.
2. Use your feet and calves to adjust the foot and calf massager to the desired angle.
3. Push the Rotation Release lever back into the closed position to lock it in place.
Rotation Release lever
Sitting or standing on your Foot and calf massager could result in personal injury and or permanent damage to the massager.
get
ready
Easy Sleeves
®
– Remove and wash fabric liners.
