page 14
© HUGO BIKE
Version of the manual 1.1
BRAKE CONNECTION
1) Press the brake lever and insert the roller into the hole.
2) Press the brake lever again and pull the brake cable so
that it moves as far away from the silver end as possible.
You can rest the cable on nut (no. 2) and pump it several
times with the brake lever (no. 1) so that the silver end is
moved as far as possible (no. 3).
3) Release the brake lever and insert the cable into the
grooves of the nut and end piece at the brake.
4) Tighten the nut on the brake. Repeat the procedure for the second brake.
3.1.2. CONNECTION OF MECHANICAL BRAKES
(HYDRAULICLIC ONES ARE WITHOUT CONSTUCITION)
Note: The right brake lever is for the rear wheel; the left brake lever is for the front wheel.