Hughes NH9000, Installation Manual

Page: 101 / 126

Corrective action Satellite modem status Appearance LED
Downlink beacon signal is locked; signal
quality is good. On Receive
The modem is receiving data packets from
the satellite. Blinking
Check receive cable connection. Problem in the receive path. Off
Ready to handle user traffic. On System
In boot or commissioning phase. Blinking
Not ready to service user traffic. Off
The satellite modem is receiving power from
its power supply. On – blue Power
Make sure the environmental
temperature is within range, that Modem temperature is too hot.
(If the modem overheats, it turns off. When
it cools it recovers to operational status.)
On – red
the modem is positioned vertically,
and that its vents are not blocked.
Check power connection. Not receiving power. Off
Bold type indicates LED appearance during normal operation.
LAN port LEDs
Green and orange LEDs on the LAN (Ethernet) port on the modem's rear panel indicate link
status and speed, as explained in
Figure 56: LAN port LEDs on page 87.
Figure 56: LAN port LEDs
87
HN9000 Satellite Modem Installation Guide
1037576-0001 Revision G
Chapter 10 LEDs