Corrective action
Satellite router status
Appearance
LED
Check transmit cable connection.
Problem in the transmit path.
Off
Signal quality is good.
On
Receive
The router is receiving data packets from
the satellite.
Blinking
Check receive cable connection.
Problem in the receive path.
Off
Ready to handle user traffic.
On
System
In boot or commissioning phase.
Blinking
Not ready to service user traffic.
Off
The satellite router is receiving power from
its power supply.
On – blue
Power
Make sure the environmental
temperature is within range, that
Router temperature is too hot.
(If the router overheats, it turns off. When it
cools it recovers to operational status.)
On – red
the router is positioned vertically,
and that its vents are not blocked.
Check power connection.
Not receiving power.
Off
Bold type
indicates LED appearance during normal operation.
LAN port LEDs
Green and orange LEDs on each of the two LAN (Ethernet) ports on the router's rear panel
indicate link status and speed, as explained in
on page 43.
Figure 26: LAN port LEDs
43
HN9500 Satellite Router User Guide
1037737-0001 Revision E
Chapter 3
LEDs