Adjusting antenna azimuth and elevation
1037749-0001 Revision F
49
2.
Loosen the top elevation adjustment nut and spin it counter-clockwise until it
is an inch or two up the elevation adjustment rod.
3.
Use the lower nut to adjust the elevation.
The black line shown in Figure 30 points to the elevation value on the
elevation scale. For example, the antenna shown in the figure is adjusted to
26°.
Figure 30: Elevation marker
4.
Spin the top elevation adjustment nut clockwise until it is snug against the
base plate.
5.
Lock down the elevation by tightening the two lockdown nuts on either side
of the Az/El mount.
