Installing the antenna and radio assembly
1037749-0001 Revision F
31
Installing the radio assembly
To mount the radio assembly to the feed support arm:
1.
Insert a single 5/16 inch × 1¾ inch bolt, with flat washer and lock washer up
through the feed support arm from underneath.
2.
Position the long adapter bracket and feed horn support bracket on the feed
support arm (as shown in Figure 13) so the bolt passes through the long
bracket and into the feed horn bracket.
Figure 13: Positioning the radio and feed horn brackets
3.
Tighten the bolt.
4.
Position the radio assembly above the long adapter bracket so that the
polarizer on the radio is nearest to the reflector, as shown in Figure 14.
Figure 14: Attaching the radio assembly
