background image

Lubrication 

 

Maintenance 

 

WARNING: 

Do not over lubricate. If oil gets on the wheel rims or the brake shoes, it will 

reduce brake performance and a longer distance to stop the bicycle will be necessary. Injury 
to the rider or to others can occur. 

 

The chain can throw excess oil onto the wheel rim. Wipe excess oil off the chain. 

 

Keep all oil off the surfaces of the pedals where your feet rest. 

 

Using soap and hot water, wash all oil off the wheel rims, the brake shoes, the pedals, and the tires. 
Rinse with clean water and dry completely before you ride the bicycle. 

 

Using a light machine oil (20W) and the following guidelines, lubricate the bicycle: 

 
What 

 

 When 

  How 

Brake Levers  

every six months   

Put one drop of oil on the pivot point of each brake lever 

 
Caliper Brakes   every six months   

Put one drop of oil on the pivot point of each caliper 
brake. 

 
Brake Cables  

every six months   

Put four drops of oil into both ends of each cable. Allow 
the oil to soak back along the cable wire. 

 
Pedals    

every six months   

Put four drops of oil where each pedal axle goes into the 
pedal. 

 
Chain    

every six months   

Put one drop of oil on each roller of the chain. Wipe all 
excess oil off the chain. 

Summary of Contents for Coaster Brake Bicycles

































Reviews: