Assembly:
Unfold the sides of the trampoline over the frame.
Screw the trampoline feet to the screw threads on the underside of the frame, after removing the
protective plastic caps. Ensure that the two special trampoline feet (with the holder for the rod) are
installed in the correct position (see diagram).
Position the retaining rod on the trampoline as shown in the diagram. Attach the special trampoline feet
through the retaining clamps on the lower ends of the retaining rod and tighten the screw firmly.
Ensure that everything is firmly assembles, and that the screws are turned inward.
You can also remove the retaining rod if necessary by removing the screw and the clamp.
HUDORA GmbH · Jägerwald 13 · D-42897 Remscheid · Germany · www.hudora.de · [email protected]
