21
parts that were replaced, as well as an invoice for any time spent on the mill by Hud-Son
Forest Equipment, Inc staff and/or Dealer/Distributor staff.
6 - Any modification to the band mill that is performed by any personnel other than Hud-
Son Forest Equipment, Inc direct staff voids the warranty.
7 - Any parts that are replaced without the discretion of the Dealer/Distributor voids the
warranty on the part the customer is replacing and no reimbursement will be made.
8 - Parts purchased by the customer from an outside source, without prior approval from
Hud-Son Forest Equipment, Inc will NOT be reimbursed.
ALWAYS CALL YOUR SERVICING DEALER FIRST!!
Dealers/Distributors carry parts and are very knowledgeable with the inner workings of
your sawmill. Remember that modifying your mill or using parts that are Not Hud-Son
Forest Equipment Inc approved, can void your warranty.
CE Approved Models: European Mills
Warranty on Parts ONLY!! No warranty on labor or shipping.
Warranty/Service Information:
Please contact our warranty department with any issues or to reorder parts,
at 315-896-4316 or 1-800-765-7297. Hours of operation are M-F 8:00 - 4:30 est.
IF NOT IN THE CONTINENTAL USA - HUD-SON DOES NOT PAY
FREIGHT OR SHIPPING ON WARRANTY OR LABOR.
Follow all the steps to safely transport the Hud-Son Saw Mill Trailer Model
1 - Lock head into travel position.
2 - Raise extension legs and lock in upright positions.
3 - Raise rear legs of frame and pin in raised position.
4 - Raise jack to desired height, remove pin and rotate to horizontal position, hook hitch
to vehicle. Plug in lights and brakes. Hook-up safety chains and break-away switch. (If
applicable)
5 - Lift front legs and lock in transport position.
6 - Be sure to clean unit of all loose debris, including all bark, sawdust and dirt.
Transport Instructions
