background image

20

Bolt for Track Wheel

976-026 - Trolly-Bolt

2 Years - call your 

servicing Hud-Son Dealer.

Track Sections

1 Year - call your servicing 

Hud-Son Dealer.

Axles (Trailer Models)

1 Year - call your servicing 

Hud-Son Dealer.

Hydraulic Motors, Pumps,

Valves, Hose & Fittings

1 Year - call your servicing 

Hud-Son Dealer.

Sprockets & Chain

90 Days - Call Hud-Son
and ask for the warranty

department 

Parts and Warranty

Parts and Warranty

Warranty:

Warranty registration cards must be completed and returned to Hud-Son Forest
Equipment, Inc. within 30 days of purchase.  Failure to do will void the warranty!!

Warranty claims must be registered with the Dealer/Distributor, and defective parts must
be returned to the Dealer/Distributor at the owner's expense.  The Dealer/Distributor will
assume cost of the shipping one way in regards to any warranty claim.  Freight is standard
UPS ground.  Any expedited services are at an additional charge and will be paid in full
before shipping at the owner's expense. The shipping of warranty/parts out of the conti-
nental USA, will not be covered under warranty. The labor charge out of the continental
USA is also not covered under warranty.

All mills have a 2 year warranty against manufactures defects.
Excluding the H360, and Oscar 52, they have a 1 year warranty.

Warranty Claim Procedure

All warranty claims that are done in the field will be handled as follows:
1 - Customer will call the Dealer/Distributor and acknowledge the problem.
2 - If the problem can be solved in the field, new parts will be shipped, invoiced and paid
for.  A credit will be given once the old parts are returned, if covered by warranty.
3 - If requested, parts to be replaced must be returned, at owner's expense within 30-days
to receive credit.
4 - If the problem is deemed to severe to be fixed in the field by the customer, then the
customer must  bring the saw mill, at the owner's expense, to the closest Hud-Son
Dealer/Distributor for repair.  If the  Dealer/Distributor is not qualified to make the
repairs, then the equipment must be returned to Hud-Son Forest Equipment, Inc at the cus-
tomer's expense.
5 - If the problem is deemed not to be a warranty problem, an invoice will follow for the

Summary of Contents for OSCAR 121









































Reviews: