U-ONE
®
-SAFETY-LWL
Configuration manual
28
USL_KonfigManual-en_R3
6.4 Replacing modules
If the system configuration has been changed or
modules have been replaced, this is detected
and displayed when the USL is switched on. The
system remains in an error state. The changed
configuration can be released using the
configuration software.
6.4.1 Simple module exchange
No configuration software is required for a simple
module exchange.
Requirement:
No change to the system configuration.
Replacement of individual modules with non-
configured modules of the same type.
A simple module exchange is not possible for
the basic device and the UO-SCU module.
6.5 Display device data
“Display device data” is used to display a
summary of all device data.
Fig. 6-3: Device data
Fig. 6-2: Module
exchange
