U-ONE
®
-SAFETY-LWL
Configuration manual
USL_KonfigManual-en_R3
27
6 Additional functions
6.1 Reset
A reset will reinitialise the entire USL, and will reset errors as well, depending on the
configuration (see section 8).
6.2 Transmit system data to other systems
System data can be transmitted to other USL systems of the same design. Data is saved using:
Pull-down menu: File
export configuration
on the laptop/PC and imported using
Pull-down menu: File
import configuration
to the new system.
“Import configuration” can be used to check the content of saved configurations without a
device connection.
If there is a device connection, con
figurations saved with “Export configuration” can be
loaded to the input screens.
Imported configurations can be saved in the device with a device connection and log in.
6.3 Create system data set without U-ONE-SAFETY-LWL
System data sets can also be created in offline mode without a direct device connection, e.g. in
the project preparation phase.
Pull-down menu: File
Offline
Device configurations can be
created as follows without a
device in offline mode:
Virtual modules are created
when the type designations are
entered.
The configuration can be
completed.
“Export configuration” is used to
save the configuration, which
can be loaded by another USL
with the same modules.
Use
to exit offline status.
Fig. 6-1: Offline
