Betriebsanleitung ACS-1000
Rev. 1.0 - 08/12
Hubitron Steuerungstechnik
Hubitron Steuerungstechnik, Hauptstr. 4/1, D-89611 Obermarchtal, Tel. +49(0)7375/922066, FAX +49(0)7375/922077
Seite 9 von 14
12.2 Charge accu
To charge the accu, the provided charging unit type
ALCS2-24A must be used.
•
shut off the ACS-1000
•
connect the charging unit with the connector of
the ACS-1000
•
connect the charging unit with the electrical
network
Now the green LED (12V) and the red LED (Charge)
should shine.
If the red LED (Charge) goes off, the charging
process is finished.
12.3 Change accu
Is the accu running time considerably declining, the
accu might be defect and must be changed. For an
accu change the unit must be sent to the dealer or
service address.
NOTE:
In accordance with the battery regulations dated.
01.10.98 old batteries & rechargeable batteries must
either be returned to the store or given to a
communal collecting place. They are not allowed to
be discarded in regular garbage!
12.4 Packing / Storage
All parts can be stored in the provided transport
case. Levelling feet and/or magnets must be
mounted on the bottom of the mounting plate. The
following picture shows the correct arrangement in
the case:
