Betriebsanleitung ACS-1000
Rev. 1.0 - 08/12
Hubitron Steuerungstechnik
Hubitron Steuerungstechnik, Hauptstr. 4/1, D-89611 Obermarchtal, Tel. +49(0)7375/922066, FAX +49(0)7375/922077
Seite 2 von 14
1. Description
The Alignment Calibration System ACS 1000 is
used to measure, data logging and calibrate the
alignment between machine table and machine
stand through a wire. With the opto electronic
sensor the deviation of the wire can be measured
and analysed without contact. The integrated
distance measuring system allows a compensation
of the length, therefore, an exact adjustment of the
wire is not required.
2. Technical Data
Dimensions (LxWxH) ................. appr. 240x280x210
Weight...................................................appr. 7400g
Power supply..................................... 12V lead accu
Display ............................................ LCD, 240 x 128
Operating elements ..................................5 foil keys
....................................................... 1 knurled screw
Laser ...................................class 2, 650nm, < 1mW
Running time .............................................. > 15 Std
Measuring range deviation........................... ± 3 mm
Measuring accuracy deviation....................... ± 3 µm
Measuring range length ............................min. 30 m
Measuring accuracy length .......................... ± 3 mm
Measuring range height ............................... ± 5 mm
Measuring accuracy height ......................± 0,05 mm
Radio connection 4 channels, SRD868MHz, <10mW
3. Scope of delivery
1
Alignment Calibration System ACS-1000 with
mounting plate
1
Charging unit ACS-1000
1
Transport case ACS-1000
1
Protector cap for sensor red
1
Light protector cap black
1
Inbus key SW4
4. Optional equipment
4.1 Remote control ACS-1000 RC
With the remote control ACS-1000 RC all relevant
functions can be used within a range of 50 m. In
addition a connection to a PC through USB serial
interface is possible. With the provided software the
measuring data can be logged and a measuring
chart is generated.
4.2 Clamping set ACS-1000
The clamping set contains 4 levelling feet and a
tension belt. With the levelling feet it is possible to
mount the Alignment Calibration System on an
uneven or rounded surface.
4.3 Magnet set ACS-1000
The magnet set contains 3 shiftable magnets with
mounting material. A quick mounting of the
Alignment Calibration System on an even and
magnetic surface is possible.
ATTENTION: Keep away from storage devices!
5. Environmental conditions
5.1 Kind of conditions
The Alignment Calibration System is exclusively
constructed for operation in closed working areas
and must
not be exposed
to
direct solar radiation
.
Protection class IP44.
5.2 Tolerance range
Operating temperature:
+5° bis +45°C
Storage temperature:
-20° bis +70°C
Max. humidity:
90%, no condensation
Temperature deviation during measurment:
< 5°C
6. Safety instruction
ATTENTION
Laser radiation
Do not look directly into the laser
beam
650nm / Power < 1mW
CLASS 2 LASER
IEC 60825-1: 2007
