Betriebsanleitung ACS-1000
Rev. 1.0 - 08/12
Hubitron Steuerungstechnik
Hubitron Steuerungstechnik, Hauptstr. 4/1, D-89611 Obermarchtal, Tel. +49(0)7375/922066, FAX +49(0)7375/922077
Seite 10 von 14
13. Remote control ACS-1000 RC
The remote control ACS-1000 RC is available as an
optional equipment.
13.1 Technical Data
Dimensions (LxWxH) ................... appr. 143x140x40
Weight.....................................................appr. 700g
Power supply........................ 4x1,2V NiMh accu, AA
Display ............................................ LCD, 240 x 128
Operating elements ..................................5 foil keys
Running time ................................................... > 8 h
Radio connection 4 channels, SRD868MHz, <10mW
13.2 Scope of delivery
1
remote control ACS-1000 RC
1
charging unit ACS-1000 RC
1
USB cable
1
software CD
13.3 Operating elements
13.4 Operation
•
turn on the ACS-1000
•
turn on the ACS-1000 RC on the on-off switch
The radio connection now builds up automatically
and on the display the same display data shows as
on the ACS-1000. Operation and menu guide are
identical.
On the display in the upper left corner the accu
status, the radio connection and the accu warning of
the main unit ACS-1000 is displayed:
Symbols:
accu status
/
radio connection activ/disrupted
accu warning of the ACS-1000
13.5 Charge accu
•
connect the provided charging unit, type ACS
110, with the connector of the ACS-1000 RC
•
connect charging unit with the electrical network
The red LED (Charge) indicates the charging
process. If the green LED (Ready) shines, the
charging process is finished.
13.6 Change accu
4 standard NiMh accus size AA feed the power
supply of this unit. As replacement we recommend
accus from Panasonic with a capacity of min.
2100mAh.
•
unscrew accu compartment with a coin
•
pull the accu plug
•
take out the accu pack and replace accus
NOTE:
In accordance with the battery regulations dated.
01.10.98 old batteries & rechargeable batteries must
either be returned to the store or given to a
communal collecting place. They are not allowed to
be discarded in regular garbage!
13.7 Change ID
For the radio communication between the ACS-1000
and the remote control ACS-1000 RC both units
must have the same ID.
•
shut off the ACS-1000 RC
•
push and hold the function keys F1+F3
•
turn on the ACS-1000 RC
With
or
change the marked field.
With
change the field.
Confirm change with
.
13.8 PC connection
When the unit is shut off connect with the provided
USB cable the USB connector with the PC, than turn
on the unit.
A virtual COM port is generated on the PC, through
this port the communication is established with the
PC.
