manualshive.com logo in svg

Hubbell GAI-TRONICS 293-101, Manual

The Hubbell GAI-TRONICS 293-101 offers a user-friendly communication experience. Enhance your knowledge of this durable device by accessing its comprehensive user manual, available for free download at manualshive.com. Discover detailed instructions and valuable insights that will help you maximize the potential of your Hubbell GAI-TRONICS 293-101.

Share
Download
background image

P

AGE 

25

 of 28

A

UXILIARY 

P

OWERED 

ADA-C

OMPLIANT 

E

MERGENCY 

P

HONES

Pub.

 

42004-378A

d:\standard ioms - current release\42004 instr. manuals\42004-378a.doc
05/06

Specifications

Auto-dial digit limit .........................................................................................................................  24 digits

Electrical

Audio output ....................................................................  Minimum 80 dB at 1 meter at normal voice level

Input .................................................................................................................................... 12 V dc, 200 mA

Phone line requirements...........................................................................  Loop start, central office (CO), or

Analog station port (PBX, PABX, or KSU)

Minimum loop current ..................................................................................  24 mA (35 mA recommended)

Auxiliary output (isolated solid state switch) .................................................................  48 V dc @ 125 mA

28 V

RMS

 ac @ 80 mA

RMS

Signaling ..........................................................................................................................DTMF 100 ms tone

Memory...................................................................................................................... Non-volatile EEPROM

Mechanical

Operating temperature range................................................................................................ -20º C to +60º C
Relative humidity.....................................................................................................to 95%, no condensation
PCBA (printed circuit board assembly) ..............................................................................Conformal coated

Model 293-101

Enclosure construction......................Valox (high impact, glass-reinforced polyester) painted safety yellow

Dimensions .............................................................  9.5 H 

×

 8 W 

×

 4 D inches (241.3 

×

 203.2 

×

 101.6 mm)

Weight................................................................................................................................................. 4.0 lbs.

Models 293-101AL and 294-101AL

Enclosure construction.........................................................................Cast aluminum painted safety yellow

(Model 294-101AL only) Braille dial pad ..................................................................Chrome-plated zinc

Dimensions .............................................................  9.5 H 

×

 8 W 

×

 4 D inches (241.3 

×

 203.2 

×

 101.6 mm)

Weight

Model 293-101AL ........................................................................................................................ 7.8 lbs.
Model 294-101AL ........................................................................................................................ 8.5 lbs.

Model 297-101 and 298-101

Construction

Panel ....................................................................................................  14-gauge, brushed stainless steel
Back box.......................................................  16-gauge cold-rolled steel with black polyurethane finish
(Model 298-101 only) Braille dial pad ......................................................................Chrome-plated zinc

Dimensions

Panel ....................................................................................  12.0 H 

×

 10.0 W inches (304.8 

×

 254 mm)

Back box (depth from mounting surface)............................................................  2.38 inches (60.5 mm)

Panel Cutout .................................................................  10.1 H 

×

 8.43 W inches (255.57 

×

 214.12 mm)

Weight

Model 297-101 ............................................................................................................................. 6.5 lbs.
Model 298-101 ............................................................................................................................. 7.2 lbs.

Summary of Contents for GAI-TRONICS 293-101































Reviews:

No comments

Related manuals for GAI-TRONICS 293-101

Aastra 6700i Series Configuration Manual preview
6700i Series
Brand: Aastra Pages: 27
Grandstream Networks GXP2130v2 User Manual preview
GXP2130v2
Brand: Grandstream Networks Pages: 12
D-Link DPH-70 User Manual preview
DPH-70
Brand: D-Link Pages: 31
Fanvil D900 User Manual preview
D900
Brand: Fanvil Pages: 155
TIG CISCO 7945 Training Manual preview
CISCO 7945
Brand: TIG Pages: 50
8x8 Inc 6753i User Manual preview
6753i
Brand: 8x8 Inc Pages: 125
Yealink T41 User Manual preview
T41
Brand: Yealink Pages: 6
AEI COMMUNICATIONS SVH-9208-S Qig preview
SVH-9208-S
Brand: AEI COMMUNICATIONS Pages: 5
Yealink VP530 Specifications preview
VP530
Brand: Yealink Pages: 2
Panasonic KX-TGP600 Quick Setup Manual preview
KX-TGP600
Brand: Panasonic Pages: 10
Yealink SIP-T9CM User Manual preview
SIP-T9CM
Brand: Yealink Pages: 9
Belkin WI-FI PHONE FOR SKYPE Quick Start Manual preview
WI-FI PHONE FOR SKYPE
Brand: Belkin Pages: 2
Z-Com WP-520 User Manual preview
WP-520
Brand: Z-Com Pages: 32
Yealink T48S Skype For Business Edition Quick Manual preview
T48S Skype For Business Edition
Brand: Yealink Pages: 3
Telrad Futuro 18 Basic Basic User'S Manual preview
Futuro 18 Basic
Brand: Telrad Pages: 2
Topcom TE-5730 Manual preview
TE-5730
Brand: Topcom Pages: 4
Topcom SOLOGIC A811 User Manual preview
SOLOGIC A811
Brand: Topcom Pages: 88
Tunstall Lifeline 4000 User Manual preview
Lifeline 4000
Brand: Tunstall Pages: 80

Brands by name

Popular brands

Load more brands