P
AGE
19
of 28
A
UXILIARY
P
OWERED
ADA-C
OMPLIANT
E
MERGENCY
P
HONES
Pub.
42004-378A
d:\standard ioms - current release\42004 instr. manuals\42004-378a.doc
05/06
Ring-down Operation
Ring-down operation enables the telephone to go off-hook when the
E
MERGENCY
push button is pressed.
The ring-down system must detect loop current and ring-down to the appropriate telephone.
Feature
Key
Sequence
Description
Default
Emergency
Button Auto-dial
Number 1
DD ...
*1
Assigns a telephone number to the auto-dial memory 1.
DD ...
represents the telephone number, which can be up to 20 digits in
length.
For access to an outside line, a pause may be required in the
telephone number to wait for secondary dial tone. The #
represents a pause in the telephone number.
Examples
:
To assign the police emergency number
911
to the auto-dial
button, enter
911*1
.
To assign 911 when a “9” is required to gain access to a CO
line, enter
9*#911*1
.
To store
*
or
#
as part of the auto-dial number, (such as for
speed dialing), enter these digits twice in succession.
*123456
789*0#
Emergency
Button Auto-dial
Number 2
DD ...
*2
Same as Emergency Button Auto-dial Number 1 except the
sequence ends in *2 instead of *1.
None
Emergency
Button Auto-dial
Number 3
DD ...
*3
Same as Emergency Button Auto-dial Number 1 except the
sequence ends in *3 instead of *1.
None
Call Button
Auto-dial
DD ...
*4
Same as Emergency Button Auto-dial Number 1 except the
sequence ends in *4 instead of *1.
None
Primary Dial
Tone Delay
# 1 0
N N
The dial tone delay is the amount of time the unit waits for a
dial tone before auto-dialing the telephone number. (00
[infinite]; 01-15 seconds)
Example
: To wait five seconds for a dial tone, enter
# 1 0 0
5
.
00
(Infinite)
Secondary Dial
Tone Delay
# 1 1
N N
This feature is only used if you must dial
9
to access an outside
line. It determines the amount of time (00-15 seconds) the
telephone waits for a second dial tone. The first programming
step indicated you must program
9*#
and the number you want
the auto-dial to access. This programming parameter allows
you to choose the amount of time the telephone waits after
encountering
#
before dialing the auto-dial number.
Example
: To wait ten seconds for the second dial tone, enter
# 1 1
1
0
.
00 (0
seconds)
Ring-down
Operation
*1
This option clears the telephone number to prevent auto-dialing
when the button is pressed. Once the button is pressed, the ring-
down system must detect loop current and ring-down to the
appropriate telephone.
None
