9
按【空杯校准】键，进入空杯校准画面如图
6
。
Press “Dry cell calibration” key, and go to the screen for calibrating cleaned dry cell as
shown in Figure 6.
图
6-1
是在升温的过程中按“确定”键，即在当前温度下升压。
In Fig.6-1, press “Enter” key during the process of warming, and it will boost under the
current temperature.
图
6-2
是在升压的过程中按“确定”键，即在当前电压下测试。
In Fig.6-2, press “Enter” key during the process of boosting, and it will do the test
under the current voltage.
Fig. 6-1
Fig. 6-2
①
Heating up----The test cell is heated up to the preset test temperature. Because the
temperature on the capacitance and dielectric dissipation factor of test cell full of air with
