6
(2) Power on
After power on, refer to the diagram showing as picture 4.
Picture 4, main interface
Right up zone
:
1
st
row shows test status (pass / over limit / invalid). Middle side large letter
shows resistance, voltage and current. 3
rd
row shows actual test resistivity and actual
temperature. Next row shows converting data as converted resistance, converted resistivity
and normal temperature.
Left up zone
:
Shows initial resistance average value, resistivity average value, converted
normal temperature resistance average value, converted normal temperature resistivity
average value.
Left down parameters zone
:
Set three output current range, test time, resistance up-limit
alarm value, being tested resistance length and section area.
Right down test zone
:(
1
)
three buttons
stands corresponding
each test data of three current range. Green stands for having data, black shows no data.
Selected button (yellow frame) shows the test data of selected current range.
(
2
)
Message
box
:
brief description, remind operating process.
(
3
)
System date and time.
(
4
)
Order button
:
Function, Setting, Test, Help.
Click“Function”button and“Help”button, shows popup menu for each detail operating.