9
Before test, make sure test cable and GND cable is connecting tight. In main interface,
press“test”button to do test. Automatically stop test when it is finished. Also press“stop”button
to interrupt test. Once finish the test, click
to switch and look up test
data.
(5) Data storage
In main interface, press“save”menu of“function”menu, save test data and take real time as
data record name.
(6
）
Data printing
In the main interface, Press“print”menu of“Function”menu to print out real test data. Thermal
paper can be used for data printing on one side, can not on the other side. Only around three
months recording on the thermal paper, not for long time storage.
(7) Document open and management
In the main interface, press “open”menu of“function”menu to enter interface as picture 9,
Picture 9
The interface shows page number, total number and selected item, document name is called
by real time. Click up-page and down page to look up, press ‘ok’ to open the selected
document.
After open the document, test data in the document would cover present test data, and
re-calculate and show the test data.
In the main interface, press “File”menu of“function”menu
，
to enter interface as picture 10,
