6
2.
Menu:
Press” Menu” button to start the menu bar, then conduct settings per the testing
requirement.
1)
Discharge detect: Press F1 key to select output discharge signals circularly, then
setup the signal output type per the detection requirement.
“TEV” Output ground wave signal
“USS” Output ultrasonic wave signal
“UHF” Output UHF signal
“CT‘ Output to-ground current signal
Close: If only one channel is required for detection, then the other channel can be
closed.
If channel1(channel2) is closed, press” Menu” to start the menu bar, select the current
channel to CH1(CH2). If CH1(CH2) is open, then press CH1(CH2), the current channel
will not display at the screen which means it is closed. If to open the Channel
1( Channel2) again, then press CH1(CH2) to open CH1(CH2), which means current