8
Press the direction keys to select number, and then press the middle Enter button for
confirmation, after that press the unit button, the green color setting is changed to the
setting data. Traffic light unit is aligned with the pre-set unit. Press Cancel key to
interrupt settings, the color will not change. The other colors can be set following the
green color setting.
3.7 Measurement mode
Press” TRIG” Key to open the trigger data setting menu bar, then press trigger mode”
F4” Key to make change of the current channel trigger mode.
Trigger Mode: Select trigger mode, Trigger mode can be automatic, normal and single
trigger.
At default condition, the Multifunctional Partial Discharge Tester host tool icons is at
“ Automatic” mode. If the Multifunctional Partial Discharge Tester host doesn’t detect
any trigger in a certain period, then trigger will be forced automatically.
When select” normal” mode, the Multifunctional Partial Discharge Tester host can
update the wave display only when the effective trigger is being detected. The
Multifunctional Partial Discharge Tester host displays the existing waves before the new
waves.