17
The tester will be then at automatic trigger state, the Channel 1 screen will display
the current ultrasonic sensor testing discharge signals .
Non-discharge Signals
with discharge signals
When the discharge signal is too large ,the value at the screen will then turn red, at
this moment the sensor is in saturation state.
Sensor Saturated
4. Measurement
Open the tester and select USS (ultrasonic mode), plug the headset and adjust volume.
The readings will be displayed at the screen. Take measurement of the background
noise. At any case, should follow the safe distance requirement.
5.Save
To save the current discharged signal, You need to prepare a USB disk to store the
graphics.
Save Graphics: Press” SAVE/RECALL”, open the save/recall menu bar, press
“ graphic” F5 key to save, the discharge signals will be stored at the USB. After testing,
plug the USB at the PC, you can read the stored discharge signal waves at PC.
6. Close