6
S
upplement: 1) if the test voltage is 220 v / 380 v, please use the special test of grid lines
(internal resistance test line, the straight wire) connected to the transmitter,
measure again;
2)1 kv ~ 10 kv line, if the external insulation layer thicker and transmitters can
start. Can unscrew the cover on the transmitter, switch on the emitter, the
measurement again. Remember to switch off transmitter when measuring
is finished.
The voltage level instructions
：
The voltage
level
instructions
Instructions
Added
500KV
Launcher insulating rod (5 meters), the
hook on the high tension line directly,
host boot.
Conventional
330KV
Launcher insulating rod (4 meters), the
hook on the high tension line directly,
host boot.
Conventional
220KV
Launcher insulating rod (3 m), direct
hook on the high tension line, the host
boot.
Conventional
110KV
Auncher insulating rod (3 m), direct
hook on the high tension line, the host
boot
Conventional
35KV
Launcher insulating rod (3 m), direct
hook on the high tension line, the host
boot.
Conventional
10KV(bare
wire)
Launcher insulating rod (3 m), direct
hook on the high tension line, the host
boot.
Conventional
