8
VIIl.Instruments To Check
Check the
project
Check the method
Normal
phenomenon
Abnormal
phenomenon
Exception handling
Insulating
rod pressure
Check pressure
performance
reference appendix
A
Leakage current
is less than 10
uA
Leakage current
is greater than 10
uA
Replace the
insulation rod
Transmitter
power
Unscrew the cap,
dial up the
transmitter switch
to open position.
Buzzer rang 2
seconds, the
indicator light
flashing in 1 and
2.
The buzzer rang,
or example, said
the battery is low.
The transmitter
switch, connect a
charger.
After full charge
indicator for the
green light.
The emitter
function
Use the special
test line of mains
connection (see
figure 1), the
mains. The
receiving host
boot.
Buzzer rang 2
seconds, the
indicator light
flashing in 1 and
2. The receiving
host display
corresponding
to the frequency
of the
transmitter.
In power under
normal
conditions, the
light is not
flashing, host
according to the
corresponding
frequency of 0 .
Transmitter failure,
returned to the
factory
maintenance.
The host
battery
The host boot
The battery
capacity is
greater than 1
Shows the battery
is too low, the
host automatically
power off.
After connect
charger, full of for
the green light .
The host
Host machine,
The host shows
Host shows the
Return to factory
