Huawei VP9050 User Manual Download Page 72

Page: 72 / 124

HUAWEI VP9050 Executive Video Terminal

User Guide

8 Video and Audio

Issue 03 (2011-12-10)

Huawei Proprietary and Confidential

Step 1

Choose

Settings

Display

Video Parameters

DVI/VGA IN

Step 2

Set the parameters listed in Table 8-3.

Table 8-3

HUAWEI HD camera parameters

Parameter

Description

Exposure

mode

This specifies the mode of using natural light. You can select one of the

following modes:



Auto

: In this mode, the VPC500 and the VPC520 automatically select

the optimum configuration based on the ambient environment. You can

set the shutter delay as required to prevent poor video quality caused by

the vibration of the VPC500 and the VPC520.



Manual

: In this mode, you can manually adjust the brightness gain,

shutter rate, and aperture.



Iris priority

: In this mode, you need to manually adjust the aperture.

The C500 can automatically select the corresponding shutter rate.



Shutter priority

: In this mode, you need to manually adjust the shutter

rate. The VPC500 and the VPC520 can automatically select a proper

aperture. This mode is mainly used for shooting moving objects.



Spotlight

: If the light reflected from a surface is very bright, you can

select this mode to obtain optimum video effects.



Brightness

: In this mode, you can manually adjust the brightness.

White

balance

This specifies the white balance to enable the camera to accurately

recognize the white color and deliver a more vivid video. The default

value is

Auto

Aperture

Sharpen video edges and contours to preserve the impression of clarity

and fine details. Over-sharpening will make video less realistic.

Contrast

This specifies the ratio of the luminance of black to that of white. If the

ratio increases, the number of perceptible degrees from black to white

increases, and video colorfulness improves.

Brightness

This specifies the video output level that changes the brightness of the

video displayed on a monitor.

Hue

The hue of a video defines the video brightness. The more bright elements

a video contains, the vivider the video looks. On the contrary, the more

dark elements a video contains, the dimmer the video looks. A color video

can have multiple hues.

Noise

reduction

The greater the value of this parameters is, the less the noise of the video

is but the more lost video details are. Therefore, set this parameter as

required.

Video

resolution

This specifies the camera's video output format.

Image

inversion

This rotates the video input from the camera by 180 degrees. When the

camera is hanged, enable this function.

Backlight

compensation

If the background of the video input from the camera is dark, enable this

function.

Summary of Contents for VP9050





























































































































Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands

Huawei VP9050, User Manual

Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands