Huawei VP9050 User Manual Download Page 29

Page: 29 / 124

HUAWEI VP9050 Executive Video Terminal

User Guide

3 Network Settings

Issue 03 (2011-12-10)

Huawei Proprietary and Confidential

Parameter

Description

Enable proxy server When the terminal needs to register with the IP multimedia

subsystem (IMS) for deploying services, enable the proxy server

and set its address.

NOTE

Borne by the standard IP protocol, the IMS uses voice over IP (VoIP)

applications based on the standard SIP applications of the 3rd Generation

Partnership Project (3GPP) to provide fixed and mobile multimedia services

for operators.

Proxy server address The proxy server needs to forward the registration request from the

terminal to the SIP server in the IMS network when the terminal is

registering with the IMS network.

Conference Service

Number

Before initiating a conference from the terminal on an IMS

network, you must set this parameter and ensure that the terminal

setting is consistent with the setting on the IMS network device.

The conference service number can be obtained from the

administrator of the IMS network device.

Site number

This specifies the site number of the local terminal. When the local

terminal is registered with the SIP server, another terminal can call

the local terminal using this site number. The site number can

contain only digits.

User name
Password

The user name is used by the SIP server to identify the local

terminal after the terminal is registered with the SIP server. The

user name and the password can contain only digits and letters.

Step 2

Save the settings.

----End

3.3.5 Setting SNMP Parameters

When the terminal needs to be managed by the MediaManager remotely, the Simple Network

Management Protocol (SNMP) parameters of the terminal must be set.
The terminal communicates with the ViewPoint MediaManager (MediaManager for short),

which is the software for managing network elements over SNMP. Considered as a network

element, the terminal is managed by the MediaManager remotely. Using the MediaManager,

the following operations can be performed on the terminal:



Setting terminal parameters, such as IP parameters, H.323/SIP parameters, E1/4E1

parameters, firewall parameters, network address book parameters, video input

parameters, video output parameters, audio input parameters, and whether to enable Web

access



Importing records to or exporting records from the network address book



Querying terminal status



Querying the terminal alarms



Diagnosing the network faults on the terminal



Restarting or upgrading the terminal

Summary of Contents for VP9050





























































































































Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands

Huawei VP9050, User Manual

Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands