Huawei VP9050 User Manual Download Page 31

Page: 31 / 124

HUAWEI VP9050 Executive Video Terminal

User Guide

3 Network Settings

Issue 03 (2011-12-10)

Huawei Proprietary and Confidential

Table 3-7

QoS parameters

Parameter

Description

QoS type

Select either of the following:



Priority

: If this option is selected, set the IP priority and the service

type.



DiffServ

: If this option is selected, set the Differentiated Services

Code Point (DSCP).

IP priority

This specifies the priority of data packets sent by the terminal and

forwarded by a network device. The value ranges from 0 to 7. The

higher the value, the higher the priority.

Service type

The network provides five types of service for the terminal to send

and receive data packets.



Normal

: The network devices transmit the data packets without

special processing.



Minimum delay

: The data packets are transmitted at the highest

rate with minimum delay.



Maximum throughput

: A large amount of data packets can be

transmitted on the network.



Highest reliability

: The data packets can be transmitted to the

remote site completely and correctly.



Minimum cost

: The data packets of equal traffics are transmitted at

the minimum cost.

DSCP

This specifies the service level of data packets sent by the terminal

during transmission.
The value ranges from 0 to 63. The higher the value, the higher the

service level.

Step 2

Save the settings.

----End

3.3.7 Setting Firewall Parameters

Ensure that the firewall settings are applicable to the H.323 videoconferencing system.

Otherwise, the system and the firewall will need to be configured to allow the video

conference to pass the firewall.
Using Network Address Translation (NAT) technology, a device within the LAN can use a

dedicated internal IP address and an external IP address that can be used for communication

with external devices. If your LAN uses NAT technology, set the IP address of the NAT public

network for the terminal.
To set the terminal's firewall parameters, do the following:

Step 1

Choose

Settings

Network

Firewall

, and then set the parameters listed in Table 3-8.

Summary of Contents for VP9050





























































































































Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands

Huawei VP9050, User Manual

Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands