Huawei VP9050 User Manual Download Page 28

Page: 28 / 124

HUAWEI VP9050 Executive Video Terminal

User Guide

3 Network Settings

Issue 03 (2011-12-10)

Huawei Proprietary and Confidential

Parameter

Description

E1.64

This specifies the site number of a terminal. This number can be

used to call the corresponding terminal if the terminal is registered

with the GK. The site number can contain only digits.

H.323 ID

This specifies the name that is used by the GK to identify a terminal

registered with it.
The name can consist of digits and letters.

Password

This specifies the password used by a terminal to register with the

GK. The GK authenticates the validity of a terminal by checking

this password.

NOTE

For successful GK authentication, the password set on the terminal should be

the same as the preset password on the GK.

Use VoIP gateway
VoIP gateway

address

Use VoIP gateway

is selected,

VoIP gateway address

must be

set. Then you can place calls to terminals connected to the VoIP

gateway.

Step 2

Save the settings.

----End

3.3.4 Setting SIP Parameters

When the Session Initiation Protocol (SIP) is used for video communications, the SIP

parameters of the terminal, such as whether to register with the SIP server, must be set.
To set the terminal's SIP parameters, do the following:

Step 1

Choose

Settings

Network

SIP

, and then set the parameters listed in Table 3-5.

Table 3-5

SIP parameters

Parameter

Description



Enable: After the terminal is registered with the SIP server

successfully, it can call a remote site using the site number, site

name, or IP address.



Disable:The terminal does not register with the SIP server, and it

can call another site using only the IP address.

Server address

This specifies the IP address of the SIP server.

Summary of Contents for VP9050





























































































































Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands

Huawei VP9050, User Manual

Search results

Summary of Contents for VP9050

Reviews:

Related manuals for VP9050

Brands by name

Popular brands