Acceptance Manual
Tecal RH2485 V2 Server
Part II Operation Guide
1
Part II Operation Guide
T01 Hardware
T01-01 Packaging
T01-0101 Packaging
Objective
To verify the server packaging
Test Networking
Diagram
None
Preset Conditions
Test Procedures
1.
Check whether the packaging is intact and not soaking.
2.
Check the components in the carton based on the packing list.
Expected Result
1.
The packaging is in good condition and has no water stain.
2.
All components listed in the packing list are intact.
Test Description
None
T01-02 Chassis
T01-0201 Chassis Structure
Objective
To verify the server chassis structure.
Test Networking
Diagram
None
Preset Conditions
The structure of the mainboard, hard disk backplane, I/O board, indicator board, VGA
board, and power board is proper.
Test Procedures
1.
Check whether there are any scratches or oxidation on the chassis surface or
deformation for the chassis cover.
2.
Check the mounting ears and the installation.
3.
Install the chassis cover on the server, and screw the chassis cover.
Expected Result
1.
The chassis is in good condition, without scratches, oxidation, or deformation.
2.
The mounting ears are in good condition and properly installed.
3.
The chassis cover is properly installed and screwed.
4.
Hard disks are inserted or removed smoothly without scratches on the surface
and fit the slots perfectly.
