Acceptance Manual
Tecal RH2485 V2 Server
Part II Operation Guide
10
T04-04 Verifying the Remote KVM Function
Objective
To verify the remote keyboard, video, and mouse (KVM) function by using the WebUI
Test Networking
Diagram
None
Preset Conditions
1.
AC power is supplied to the server.
2.
The IP address of the iMana management network port is obtained.
3.
Internet Explorer 8.0 or Firefox 9.0 is installed on the terminal.
4.
JRE1.6u25 or later is installed on the terminal.
5.
The terminal is connected to the iMana network port of the server over the
network.
Test Procedures
1.
Log in to the iMana Web.
2.
Click
Remote Control
, and click
Remote Virtual Console (requiring JRE)
on
the right.
Expected Result
A page is displayed, allowing you to use the remote KVM function.
Test Description
T04-05 Powering On/Off and Resetting a Server Remotely
Objective
To verify that you can power on, power off, and reset a server on the iMana Web.
Test Networking
Diagram
None
Preset Conditions
1.
AC power is supplied to the server.
2.
The IP address of the iMana management network port is obtained.
3.
Internet Explorer 8.0 or Firefox 9.0 is installed on the terminal.
4.
JRE1.6u25 or later is installed on the terminal.
5.
The terminal is connected to the iMana network port of the server over the
network.
Test Procedures
1.
Log in to the iMana Web.
2.
Click
PS Management
, and click
Power Control
.
3.
Select
Power Off
if the server is powered on, and click
OK
.
4.
Select
Power On
if the server is powered off, and click
OK
.
5.
Select
Cold Reset
if the server is powered on, and click
OK
.
6.
Select
Graceful Reboot
and click
OK
.
Expected Result
1.
After you select
Power Off
, the OS shuts down and the server powers off.
2.
After you select
Power On
, the server is powered on and the OS is started.
3.
After you select
Cold Reset
, the server OS restarts successfully.
4.
After you select
Graceful Reboot
, the OS shuts down and then starts
