Huawei Tecal RH2485 V2, Operation Manual

Page: 10 / 21

Acceptance Manual
Tecal RH2485 V2 Server
Part II Operation Guide
9
T04-02 Querying the Server Health Status
Objective
To verify that you can query the server health status on the iMana Web.
Test Networking
Diagram None
Preset Conditions 1. AC power is supplied to the server.
2. The IP address of the iMana management network port is obtained.
3. Internet Explorer 8.0 or Firefox 9.0 is installed on the terminal.
4. JRE1.6u25 or later is installed on the terminal.
5. The terminal is connected to the iMana network port of the server over the
network.
Test Procedures 1. Log in to the iMana Web.
2. Click Overview , and view the health status icons displayed in the upper right
corner.
3. Check the active alarms displayed on the lower part of the page.
Expected Result 1. The icons show that the server has no alarm, as shown in
.
2. No alarm is generated for the server.
Test Description
T04-03 Querying Server Logs
Objective
To verify that you can query server logs on the iMana Web.
Test Networking
Diagram None
Preset Conditions 1. AC power is supplied to the server.
2. The IP address of the iMana management network port is obtained.
3. Internet Explorer 8.0 or Firefox 9.0 is installed on the terminal.
4. JRE1.6u25 or later is installed on the terminal.
5. The terminal is connected to the iMana network port of the server over the
network.
Test Procedures 1. Log in to the iMana Web.
2. Click Events and Logs , and click System Events .
3. View the system events displayed in the right pane.
Expected Result
The system event logs are displayed.
Test Description