Huawei SUN2000-5KTL-M0 Page 15 User Manual Download

Page: 15 / 95

SUN2000-(5KTL, 6KTL)-M0
User Manual

2 Overview

Issue 03 (2019-07-19)

2.3 Label Description

2.3.1 Enclosure Labels

Symbol

Name

Meaning

Delayed discharge

Residual voltage exists
after the SUN2000 is
powered off. It takes 5
minutes for the SUN2000
to discharge to the safe
voltage.

Burn warning

Do not touch an operating
SUN2000 because it
generates high
temperatures on the shell.

Electric shock warning
label



High voltage exists
after the SUN2000 is
powered on. Only
qualified and trained
electrical technicians
are allowed to perform
operations on the
SUN2000.



High touch current
exists after the
SUN2000 is powered
on. Ensure that the
SUN2000 has been
grounded before
powering on it.

Refer to documentation

Reminds operators to
refer to the documents
shipped with the
SUN2000.

Grounding

Indicates the position for
connecting the protective
earthing (PE) cable.

Operation warning

Do not remove the DC
input connector or the AC
output connector when the
SUN2000 is running.

SUN2000 serial number
(SN) label

Indicates the SUN2000
SN.

Summary of Contents for SUN2000-5KTL-M0
































































































Search results

Summary of Contents for SUN2000-5KTL-M0

Reviews:

Related manuals for SUN2000-5KTL-M0

Brands by name

Popular brands

Huawei SUN2000-5KTL-M0, User Manual

Search results

Summary of Contents for SUN2000-5KTL-M0

Reviews:

Related manuals for SUN2000-5KTL-M0

Brands by name

Popular brands