Huawei SUN2000-100KTL User Manual Download Page 114

Page: 114 / 156

NO TICE

Verify that the ciphertext in the boot script file matches the login password of the

SUN2000 app. If they do not match and you insert the USB flash drive for five

consecutive times, the user account will be locked for 10 minutes.

Table 7-12 LED indicator description

LED Indicator

Status

Meaning

Green off

There is no operation

with a USB flash drive.

Blinking green slowly

There is an operation

with a USB flash drive.

Blinking green fast

An operation with a

USB flash drive has

failed.

Steady green

An operation with a

USB flash drive is

successful.

Step 8 The system automatically restarts when the upgrade is completed. All LED

indicators are off during the restart. After the restart, the indicator is blinking

green slowly for 1 minute and then it becomes steady green, which indicates that

the upgrade is successful.

----End

SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series

User Manual

7 Man-Machine Interactions

Issue 11 (2021-11-10)

105

Summary of Contents for SUN2000-100KTL





























































































































































Search results

Summary of Contents for SUN2000-100KTL

Reviews:

Related manuals for SUN2000-100KTL

Brands by name

Popular brands

Huawei SUN2000-100KTL, User Manual

Search results

Summary of Contents for SUN2000-100KTL

Reviews:

Related manuals for SUN2000-100KTL

Brands by name

Popular brands