Huawei SUN2000-100KTL User Manual Download Page 105

Page: 105 / 156

Figure 7-16 Power adjustment parameters

Table 7-8 Power adjustment parameters

Parameter

Description

Remote power schedule

If this parameter is set to Enable, the inverter responds to the

scheduling instruction from the remote port. If this parameter

is set to Disable, the inverter does not respond to the

scheduling instruction from the remote port.

Schedule instruction valid

duration (s)

Specifies the time for maintaining the scheduling instruction.
When this parameter is set to 0, the scheduling instruction

takes effect permanently.

Maximum active power (kW)

Specifies the output upper threshold for the maximum active

power to adapt to different market requirements.

SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series

User Manual

7 Man-Machine Interactions

Issue 11 (2021-11-10)

Summary of Contents for SUN2000-100KTL





























































































































































Search results

Summary of Contents for SUN2000-100KTL

Reviews:

Brands by name

Popular brands

Huawei SUN2000-100KTL, User Manual

Search results

Summary of Contents for SUN2000-100KTL

Reviews:

Brands by name

Popular brands