12
Routing Cables
Routing a Subscriber Cable (MA5811S-AE08 without terminal block)
1
Remove the cap from the waterproof connector at the subscriber cable entrance.
2
Route the subscriber cable through the cap, waterproof connector, and device compartment.
3
1. Install the terminal block to the support delivered in the package. (The terminal block should be
provide by the user.)
2. Use the impact tool to route the user-side subscriber cable.
3. Use the impact tool to route the device-side subscriber cable to the terminal block.
350 mm
User-side
subscriber
cable
Device-side
subscriber
cable
