Checking Device Running used local power
20
After the MA5811S-AE08 is installed and the PSE does not supply power for the device, use the local
power test port to test whether the device can run normally.
Before the test, connect local power to the BATTERY hole. If the RUN/ALM indicator blinks green, on
for 1s and off for 1s, the device can run normally.
For details about indicator status of the MA5811S-AE08, see Page18.
The device-side connector on the electrical cable must meet the following requirements if users
perform a test using self-prepared electrical cable.
Output of the local power:
12 V DC, 3 A
