Huawei SmartACU2000D Series User Manual Download Page 52

Page: 52 / 92

SmartACU2000D Smart Array Controller
User Manual (with No PID Module)

4 System Installation

Issue 01 (2020-02-14)

4.5.4 (Optional) Installing the 24 V Power Module

Step 1

Remove the mounting bracket of the 24 V power module from the cabinet.

Step 2

Install the 24 V power module in the mounting bracket.

Step 3

Secure the 24 V power module to the mounting bracket using the screws (delivered with the
24 V power module).

Step 4

Install the 24 V power module in the cabinet.

Step 5

Connect the AC input power cable (delivered with the SACU) to the 24 V power module
based on the cable label.

Figure 4-15

Installing a 24 V power module

----End

4.5.5 Installing the PoE Module

Step 1

Loosen screws (do not remove the screws) and remove the mounting board.

Step 2

Remove screws from the PoE module installation position.

Step 3

Place the PoE module at the installation position and align the mounting holes. Then secure
the PoE module.

Indicators should be in the lower left corner.

Step 4

Secure the mounting board.

Summary of Contents for SmartACU2000D Series





























































































Search results

Summary of Contents for SmartACU2000D Series

Reviews:

Related manuals for SmartACU2000D Series

Brands by name

Popular brands

Huawei SmartACU2000D Series, User Manual

Search results

Summary of Contents for SmartACU2000D Series

Reviews:

Related manuals for SmartACU2000D Series

Brands by name

Popular brands