Huawei RRU3632 Installation Manual Download Page 10

Page: 10 / 129

Changes in the RRU3832&RRU3632

Installation Guide

This chapter describes the changes in the

RRU3832&RRU3632 Installation Guide

05 (2014-06-30)

This is the fifth official release.

Compared with issue 04 (2013-12-30), this issue includes the following change:

Topic

Change Description

3.5.1 Clearance for a Single RRU

Added the clearance for a single RRU or
multiple RRUs on the bitumen ground.

3.5.2 Clearances for Three or More RRUs

9.8 Installing an RRU Alarm Cable

Added notes under the procedure.

3.4 Installation Scenarios

Added restrictions on RRU mounting kits in
assembled installation mode.

Compared with issue 04 (2013-12-30), this issue does not include any new information and no
information is deleted from this issue.

04 (2013-12-30)

This is the fourth official release.

Compared with issue 03 (2013-12-23), this issue includes the following change:

Topic

Change Description

3.4 Installation Scenarios

Modified the figure showing the U-steel
specifications.

RRU3832&RRU3632
Installation Guide

1 Changes in the RRU3832&RRU3632 Installation Guide

Issue 05 (2014-06-30)

Huawei Proprietary and Confidential

Summary of Contents for RRU3632


































































































































Search results

Summary of Contents for RRU3632

Reviews:

Related manuals for RRU3632

Brands by name

Popular brands

Huawei RRU3632, Installation Manual

Search results

Summary of Contents for RRU3632

Reviews:

Related manuals for RRU3632

Brands by name

Popular brands