Huawei RMS-SNMP01A, User Manual

Page: 56 / 92

RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Issue 08 (2020-01-09) Copyright © Huawei Technologies Co., Ltd. 48
Figure 4-31 Performance Data page
4.6.5 SNMP
On the SNMP tab, you can configure the SNMP version, SNMP port, SNMPv1&SNMPv2c
read and write communities, SNMPv3 user, NMS address and permission setting, and SNMP
TRAP, as shown in
Figure 4-32 .
Figure 4-32 SNMP
The SNMP page configures the SNMP version, SNMP port, SNMPv1&SNMPv2c read and
write communities, and SNMPv3 user, as shown in
Figure 4-33 and Figure 4-34 .
If you manage the UPS by using the NMS, pay attention to this topic.
SNMP version has three options: SNMPv1&SNMPv2c , SNMPv3 , and ALL . Different
versions support different NMS access mechanisms.

The default value is SNMPv3. The configured user name, authentication protocol
(MD5/SHA), and proprietary protocol (DES/AES) are used by the NMS to access the
SNMP card and add SNMPv3 users, as shown in
Figure 4-33 .

For the SNMPv1&SNMPv2c option, enter the read and write communities. If this option
is selected, the NMS needs to connect to the SNMP card through the read and write
communities set here. When setting the read and write communities for the first time,